Apeks ATX40 Octo
- The ATX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
- Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.
- Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
- Compatible with EAN40 out of the box.
- Pneumatically-balanced second stage results in smooth, easy breathing.
- The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
- The Octopus is manufactured with active protection against infection as all moulded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
- A silicone exhaust valve improves the breathing performance of the regulator.
- The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
- Suitable for cold water use (below 10 C / 50 F).
Contact Us
Address:
3869 Lake Emma Road
Lake Mary FL, 32746
Ph: (407) 333-8856
Hours:
M-F 10am-7pm
SAT 10am-5pm
SUN 1pm-5pm (unless otherwise posted)
Email Address: dive@seminolescuba.com
